lacondesanyc Finding your suitable readers for ao smith water heater ecs 50 210 manual is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith water heater ecs 50 210 manual including detail information and customer reviews. Let’s find out which is your favorite one.
571 reviews analysed
1. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
2. Atmor AT-900-03 Single Sink 3kw/110V, 0.5 GPM Point-Of-Use Tankless Electric Water Heater and 0.5 GMP Sink Aerator
Feature
- Ideal for single sink application in areas with at least 57° ground water temperature
- Maximum flow rate 0.5 GPM (Gallons per Minute) = 45° F temperature rise. Slower flow rate = higher temperature rise.Max tested working pressure: 16 BAR (230 PSI)
- Requires a direct connection to a 30 Amp single-phase breaker. Required wire size: 10 AWG. Not a plug-in unit.
- Instant and endless hot water on demand without the wait or worry of ever running out
- Includes a 0.5 GPM Aerator for sink faucet and Pressure Relief Device (PRD)
Description
SAVE ENERGY, WATER, MONEY, TIME – Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 3kW/ 110V Point-of-Use Tankless Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That’s right, instant hot water on demand! This unit is specifically designed for hand washing SINGLE SINKS in areas with at least 57°F ground water temps (See Sizing Guide). Please note that this unit will not operate properly in Northern regions with inlet water temps colder than 57 degrees. A flow rate of 0.5 gallon per minute (GPM) is required in order to achieve a 45° temperature rise. Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG. Standard 1/2″ NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM. Maximum temperature rise possible for unit is 45°F. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner’s manual. In order to achieve maximum performance, it is recommended to install the included 0.5 GPM sink aerator. Failure to comply with the installation and operating instructions in our Owners Manual or improper use will void the warranty. The water heater must be installed by a licensed electrician in compliance with all local and building regulations.
3. FloodStop Water Heater Auto-Shutoff Valve, FS3/4NPT, V4 Controller, Water Damage Prevention
Feature
- PREVENT WATER DAMAGES – This automatic shut off valve will trigger when a leak is detected from your water heater, potentially preventing 200+ gallons of water leaking into your home.
- EASY TO INSTALL – The FloodStop valve is installed between the water heater and the manual shutoff valve
- can be installed in fifteen minutes.
- SENSOR AT BASE OF HEATER – The sensor part of this system is placed at the base of the water heater. As long as the sensor stays dry, the valve will stay open permitting water to flow through to the heater.
- IMMEDIATE SHUTDOWN – Once the leak sensor at the base of the heator senses moisture, the valve will immediately close off all water flow and sound alarms.
- CERTIFIED LEAD FREE – Certified lead free under S. 3874, AB1953 with a One Year Manufacturer’s Warranty.
Description
Prevent flood damage and avoid costly repairs with the easy-to-install, newly designed Lead free Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel’s alarm. Designed for both residential and commercial dwellings. The FloodStop (FS 3/4-NPT) kit automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational. This kit includes everything you need to protect your property from costly water-leak damage: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. A power supply is included; you need to also install four AA batteries (not included) for backup power, unit will beep to alert you of low or no batteries. The controller has “one” output contact (normally open) that can be attached to a dialer or security system so you can be alerted to a leak when not home! You can even add multiple water sensors for different areas around your water heater. If your water heater should begin to leak, the controller tells the water valve to close and alerts you with an 87db alarm.
4. A.O. SMITH 9003542005 Water Heater FV Pilot, 190-Degree C, Natural
5. Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
6. A.O. Smith by Honeywell Gas Control Valve 100262939 2" Cavity Natural Thermostat Compatible with A.O. Smith, State, American, Whirlpool, and Craftmaster Brand Water Heaters
Feature
- Please feel free to contact us directly to determine if this is the correct gas valve for your water heater – we need heater’s model and serial number to cross reference
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
- Temperature control assembly 100262939 supplies the burner with gas to heat the water
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158
7. Reliance Hot Water Heater Gas Control Valve 100112336 9007884005 100093974 1" Cavity Thermostat Compatible with Reliance, State, A.O. Smith, and American branded heaters
Feature
- Temperature control assembly 100112336 supplies the burner with gas to heat the water
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, and American branded heaters
- Intended use with a gas hot water heater
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. Installing the valve and then returning used is prohibited. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, and Reliance.
8. Rheem SP20060 Electric Water Heater Tune-Up Kit
Description
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
9. Reliance Water Heater Co 9003542 Natural Gas Pilot Assembly
10. Reliance Water Heater Pilot Assembly 100109295 9003542005 Replacement Part Natural Gas Compatible with Reliance, A.O. Smith, and State Branded Tanks
Conclusion
By our suggestions above, we hope that you can found Ao Smith Water Heater Ecs 50 210 Manual for you.Please don’t forget to share your experience by comment in this post. Thank you!
