lacondesanyc Nowadays, there are so many products of ao smith water heater customer service in the market and you are wondering to choose a best one.You have searched for ao smith water heater customer service in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith water heater customer service which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
727 reviews analysed
1. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.
2. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
3. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
4. A.O. Smith by Honeywell Gas Control Valve 100262939 2" Cavity Natural Thermostat Compatible with A.O. Smith, State, American, Whirlpool, and Craftmaster Brand Water Heaters
Feature
- Please feel free to contact us directly to determine if this is the correct gas valve for your water heater – we need heater’s model and serial number to cross reference
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
- Temperature control assembly 100262939 supplies the burner with gas to heat the water
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Description
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158
5. Stiebel Eltron 233219 2.5 gallon, 1300W, 120V SHC 2.5 Mini-Tank Electric Water Heater
Description
Product Description
Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.
From the Manufacturer
The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).
6. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
7. EcoSmart ECO 11 Electric Tankless Water Heater, 13KW at 240 Volts with Patented Self Modulating Technology
Feature
- Lifetime warranty
- Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
- Never run out of hot water with an ECOSMART tankless water heater
- Patented Self Modulating Technology and design
- ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98
Description
Product Description
This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
NOTE : 11Kw at 220 is equal to 13kw at 240.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
8. EcoSmart ECO 27 Electric Tankless Water Heater, 27 KW at 240 Volts, 112.5 Amps with Patented Self Modulating Technology
Feature
- Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches
- Pipes fittings :3/4 inch NPT
- Digital temperature control in 1-degree increments allows control of hot water
- Activation Flow: 0.3 GPM
- Copper and stainless components designed for efficiency, durability and easy replacement.
- Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
- Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, (3) 40 required breakers, 112.5 maximum power (AMP), (3) 8 required wire.Amperage Draw:113 A
- Required Breaker Quantity: Three 40 Amp Double Pole
- Recommended Electrical Panel: 200 Amps
- NEVER run out of hot water with an ECOSMART tankless water heater.
- Save up to 12 cubic feet of storage space.
- Digital temperature control in 1-degree increments gives users complete control of hot water
Description
Product Description
Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4” NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.
9. Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing LP Propane
10. BlazeTech 1500W Immersion Water Heater | Premium Stainless-Steel Water Heater | Electric Bucket Heater | Heats 5 Gallons In Minutes | 120V Portable Water Heater | Camping | Hot Tub | Pool | Bathtub
Feature
- ???? EXPERIENCE AMERICA’S #1 IMMERSION WATER HEATER, DESIGNED BY BLAZETECH – designed to heat 5 Gallons of water in minutes, our product is the highest-quality most premium Water Heater available on the market today. You can use it to warm your hot tub, inflatable pool or your bath tub.
- ???? HIGH-QUALITY MATERIAL – This water heating coil is made of high-grade stainless-steel material for high safety and long service time. The heating rod has durable construction for long-lasting use.
- ???? ENERGY-SAVING AND ENVIRONMENTAL PROTECTION – Our Premium immersion heating rod makes the water hot in the most energy-efficient and safest way. It is quick and has a corrosion resistive body that keeps it away from rusting.
- ????WARM YOUR WATER IN THE FARM OR ON JOB SITE – The Premium BlazeTech water heater is designed to help American’s worker and farmer to warm their water when they need it the most. It will be for plants too during a cold season or for your outside animals!
- ???? 100% MONEY-BACK GUARANTEED- If for whatever reason you are unhappy, receive 100% of your money back.
Description
Experience premium, superior quality immersion water heater by BLAZETECH
America’s #1 Immersion Water Heater, designed to heat 5 Gallons of water in minutes, our product is the highest-quality most premium water heater available on the market today.
Completely Stainless-Steel product, non-rusty for the Ultimate Farmer/Camping/Bathtub/Shower experience.
Our submersible water heater set the standard for safety pool, campsites and bathroom.
Enjoy an amazing hot water experience with complete peace of mind knowing that our proprietary, 1500W premium immersion water heater is
carefully designed to warm water without burning yourself!
Designed by Farmers – for Farmers. America’s #1 Premium Submersible Water heater.
Just like you, we need to warm our water during cold season. After using so many unsafe and inferior water heater, we decided to create our own premium Immersion Water Heater that provide the best quality without sacrificing durabilty and beauty. Virtually all of our customers are amazed about the efficiency of our product for a 5 gallons or for your inflatable pool.
An absolute most-have when you run out of hot water.
Easy-to-Follow Instruction for BlazeTech Immersion Water Heater
Step 1: Put water in your bucket
Step 2: Put the Immersion Water Heater in minimum 9 inches of water
Step 3: Plugged your Premium BlazeTech Water Heater
Step 4: Wait before your water is warm (Do not touch the water when the product is plugged)
Step 5: Unplugged the BlazeTech water heater
Step 6: Taking it out of water and enjoy your hot water
So get this amazing device today, and you no longer wait hours to have hot water! Click on “Buy Now”
Conclusion
By our suggestions above, we hope that you can found Ao Smith Water Heater Customer Service for you.Please don’t forget to share your experience by comment in this post. Thank you!
